Knitting
Before you start knitting read the articles from the Software section
- Machine limitationsLike every machine, Kniterate has a few limitations: Knitting with a maximum of 6 yarns in a piece. Knitting with a maximum of 6 yarns in a row. Floats a maximum length of 6-7 stitches in fair isle…
- ChecklistBefore you start knitting, always check the following: Software Selected correct feeders for waste yarn, draw thread, and knitting yarn Speed, stitch size, and roller take-down adjusted to yarn and…
- Start a programAfter making a design in the Kniterate software, download the ‘.kc’ file to your preferred folder and rename it ‘command.kc’. Transfer your file to an SD card. To do this, insert the SD card into the…
- Keeping watchWhen the machine is knitting, you have to pay attention to a couple of things. It is strongly recommended to stay with the machine and keep an eye on the performance of the machine, the sensors and…
- Pausing, restarting or stopping the machinePausing Pausing the machine during knitting implies that the knit can be resumed. There are two ways to do it: 1. Using the menu dial: Turn the dial until you read 'Pause' in the display and click the…
- Removing a knit from the needlesAn unfinished knit Sometimes you want to drop off a knit before it is finished and start over, due to a mistake for example. If the knit has not yet been caught by the rollers, you will have to gently…
- Machine errorsError code Error location Indication light FRONT DOOR (DOOR FL/ DOOR FR) Front doors both left and right: make sure doors are well closed (the red led near the door magnet should be lit up) No REAR…