Finding a broken needle

Last updated In Machine

Broken needles cause holes, ladders, or broken stitches in your knitting. The easiest to spot, is a hook that has broken from the needle. A damaged latch can be a troublemaker too. Sometimes they get crooked and no longer close properly. Sometimes they get caught under the hook. The latter can often be fixed.

A needle with a damaged transfer spring can knit fine but will act up when transferring.

Here is a guide to doing a thorough check of your needles:

  1. Push all the needles ALL the way up, to compare them properly. It is much easier to spot needle issues if you inspect several at once, so with a quick scan, you can compare them and see which one is not exactly like the rest
  2. Make sure they are well flat against the needle bed. Sometimes needles get bent toward the floor/ceiling, and that is harder to see. One way to check this is to go to the other side of the machine, so you have a better vision for this.
  3. Open the latches (you can use the needle bed slider plate).
  4. Check that they are all perfectly parallel. You can use a marker to mark those that are slightly bent so can quickly identify those needing replacement.
  5. Check that all the hooks are opened the same way. It is easy to spot hooks slightly more open, particularly after many hours of operation, so take a close look at this.
  6. Check that all the latches open and close smoothly.
  7. Lastly, lower a bit the buts so the carriage can pull them down smoothly. A needle with a broken butt can’t be selected by the carriage and won’t knit. This is easily recognized by looking at the aligned butts.

Repeat the check on the other needle bed.