jacquard printing problem

Hi everyone!
I'm having trouble printing this jacquard pattern with natural yarns and cotton.
I used:
1. Waste
2. Nettle yarn Nm 1/10000 combined with Tencel hemp 1/24000
3. Cotton 16/2
4. Tencel hemp 1/10000
Parameters used: stitch 6, speed 400, roll 450
Can you help me figure out what to change?
I changed various machine parameters, I changed the position of the yarns, I replaced the cotton yarn first with Nm 3/50, then with 3/30, but there was no improvement...
Help me, thanks!

https://drive.google.com/file/d/1RDg5jM7F5_yE5qPGfsoDXf02vmq1D4Xc/view?usp=drivesdk

5 replies

  1. Ariadna PonsOfficial reply

    Hi @Giuseppina P. ,

    I have the impression that the yarns you are using are very thin. Also each one of them has a different weight, which makes it way more challenging to find the right adjustments.

    To start with, I'd suggest changing the stitch size to 5 in the front and 4 in the rear. You can also increase the roller to 550-600. Reduce the speed to 200 until the adjustments are right to knit constistently.

    Let us know how it goes!

  2. Giuseppina P.

    Okay, that’s fine! I'll try it
    I also wanted to know why the waste cast part is always so bad

  3. Ariadna PonsOfficial reply

    @Giuseppina P. it's also because of the yarn thickness. Try reducing the stitch size in the interlock part to 4 or even 3.

  4. Giuseppina P.

    I tried stitch rear 4 and stitch front 5 but it gave me the same error as before. So I put all stitch 4 but it made holes, how to do it? I used speed 200 roller 600

  5. Ariadna PonsOfficial reply

    hi @Giuseppina P. ,

    It looks like the problem happens mainly in the white and brown areas, yarns 2 and 4. Could you try swapping these yarns for ones more similar in weight to yarn 3? If possible, yarns of the same material and weight in different colors.

Add a reply

Sign in to reply. Your Kniterate account works here: the same e-mail and password as customist.com, or Google.