Maybe a solution for many problems
I have successfully knitted about 30 scarves, and I am knitting "thin" - 2/48 single tread.
I actually have successfully knitted 2/60 (50/50 cashmere/silk) - amazing 45 x 200cm - only 190 grams.
Then, for some reason, the machine just got "mad" - I couldn't even start to knit, all was "f... up" - I was mad as well.
The feeders was "meters" away from the needles, had no chance to pick them up, ...I mean NO WAY!
To make a long story about what I have used the easter to, yes, my head down in the Kniterate....
I found out it's very critical that the possission from the feeder to the needles are way more "sensitiv" then I have evet dreamed about, so let me short try to explain with this drawing:
Numbers referst to the feeder.
I made a simple knit, just with a "start" knit, deleted the 15 first ROWS, and stopped the knit as soon it have knitted some needles, lets say 20-50.
Then I checked how the feeders possission was regarding the needles, and I adjusted (the part on top of the feeder)

so the possission become as number 2 in the drawing below, meaning, that the tread "goes true, needle 1 and 2 (from left to right on the drawing)
I did this, with all feeders, changed the "start-file" to use feeder 1, 2, 3, 4, 5 and 6 (waste yarn) - and I did the adjustment both "forward" and "backward" - and do not relay on that the possission will be the same on anyone - at my machine they are all diffrent (witch surprice me as well)
Then knit the full start, stop it at the end, check that every (every secound) needle are knitted correct, if all ok, continue to chech the next feeder.
I suggest to use a strong color, I used yellow as its easy to see)
1. The feeder are actually looking good, going true needle "1", it's knitting, but leave random missed needles, mess up the "bindoff".
2- The perfect solution, from the feeder, true needle "1 and 2", never miss anything, finishing perfectly, perfect bindoff.
3. Almost as good as 2, do not miss needles,works very good fixing the treads in the (tread cutter (well, never seen it cut the tread)) but mess up the right edge (no matter what tension)
I am surpriced how important so perfect possission are, ..maybe not that it's perfect, but that what seems to work well, makes another "problem, like if you use 3...it mess up the right end, no matter what tension.
So to all who have issues with missing needles, bindoff, this solved all my problems..even why it got "mad" will be a mystery...
PS! I also had a issue, where in the middle of knitting, the machine suddenly did a "by pass" without the needles being "activated" so it drag the tread stright over the knit, like it missed all.
I have asked Gerard, if it can be that the SD-card that came with the machine are to slow (only a issue if the SD-card works as a "harddisk" and read directly from the SD-card during knitting.
I cahenged my card to a faster card, and have never seen the issue after.
But this information, I can not confirm are correct before its confirmed that the machine uses the SD-Card as a "harddisk".